• 15 DAYS RIGHT OF RETURN
  • CUSTOMER SERVICE (+39) 080 534 38 01
  • DELIVERY IN 48 HOURS
You have no items in your shopping cart.
Close
Search
Filters

BURTON FIEND UNDFTD Ltd 2016

Manufacturer: BURTON SNOWBOARDS
BURTON FIEND UNDFTD Ltd 2016
£193.78
£233.72
Availability: In stock
*

BURTON FIEND UNDFTD Ltd 2016

 

 Burton Fiend LTD

 

Raise the bar, then launch right over it with pro-approved response, cranked-up warmth, and Lock N’ Load lacing.
There’s no time for second-guessing in technical terrain, which is why serious riders step to the new Fiend LTD. Innovating the lace-up category, this limited edition steps up its stock counterpart with the focused heel hold and the customizable fit of new Speed Zone™ Lock N’ Load Lacing. The added warmth of Sleeping Bag heat-reflecting foil and impact absorbing ReBounce cushioning with AutoCANT EST® settles the score on a new benchmark in genre-busting freestyle performance.

Traditional Lacing:No fancy wires, reels, or handles, just a couple of laces for that tried and true feel and customized fit.
Shrinkage™ Footprint Reduction Technology:Reduces the boot’s overall footprint one full size, meaning a men’s size 10 fits like a size 10, but has the footprint of a typical size 9. Shorter, lighter, sleeker—never suffer from toe drag again.
Articulating Cuff:Allowing the upper and lower zones of the boot to flex independently creates fluid forward motion, minimizes shell distortion, and maximizes heel hold and response.
Flex Notches:These strategically placed flex notches allow for smoother, more fluid lateral and medial flex, perfect for pressing and tweaking.
New Medium Flex Powerup Tongue:For greater rebound and durability, Burton has upgraded the majority of their 2014 boots to this new dual density tongue construction. Like all their Thin Profile 3D® Moulded Tongues, it’s available in one of three flex options based on the boot. For even greater response, check the thermoplastic-reinforced Power Up Plus Tongue on the Driver X.
Low Profile EST® Optimized Midsole:EST® goes beyond bindings by optimizing the soles on selected boots for a more direct connection. Lower-profile, lighter weight, and with a reduced ramp angle, EST lowers your centre of gravity and improves feel. All without sacrificing an ounce of cushioning thanks to ultra-dampening B3 Gel inserts.
Autocant Cushioning:Dual-density EVA allows your foot to settle into a more natural and relaxed position, resulting in improved comfort, reduced fatigue, and smoother, more direct board control.
Rebounce Cushioning:More comfort and more warmth is the Burton-exclusive upgrade of new Rebounce Cushioning. The extra hops are accomplished by surrounding the foot with a two-layer 3D laminate of cushy PU plus reflective material, which not only reduces impact and absorbs chatter but also turns heat inward.
Sleeping Bag Reflective Foil:This new low-profile and lightweight underfoot technology reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.
Total Comfort Construction:Get an instantly broken-in feel right out of the box. Total Comfort’s industry-exclusive construction eliminates the break-in period for a fit that feels just as good from day 1 to 100.
Snow-Proof Internal Gusset:All Burton boot tongues feature an internal gusset construction to completely seal the lower zone of the boot, keeping feet warm and dry.
Level 2 Moulded EVA Footbed:Lightweight and long-lasting shock absorption.
ESS Support Shank:The added support reduces fatigue while preventing your arch from collapsing on itself when you bomb drop a 40-footer.
Focus Cuff:Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle for increased response.
Rad Pad:Located on the top of your instep, right where the liner laces exert the most pressure, these pre-curved panels keep your feet stoked and secure.
AEGIS™ Antimicrobial Coating:Inhibits foul odours. Your feet [and your friends] will thank Burton. Look for Aegis™ on select liners and footbeds.

Imprint™ 3 Liner:
1. Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock
2. Tuff Cuff with Velcro® J-Bar Interface and Inner Lace Lock
3. Plush Cuff 1.0 [Women’s Only]
4. Lightweight Power Panels [Extra Tall for Added Response on Imprint Liner 3X]
5. Sock Lock
6. Rad Pad for Lace Comfort
7. Velcro® Liner Closure
8. Level 2 Moulded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating
9. Heat-Moldable.



Features

  • Shrinkage™ Footprint Reduction Technology
  • LACING: Traditional with NEW Speed Zone™ Lock N’ Load
  • LINER: Imprint™ 3 Liner with Focus Cuff and Rad Pad
  • CUSHIONING: Low-Profile EST® Optimized Midsole with AutoCANT Cushioning and ReBounce Cushioning with Sleeping Bag Reflective Foil
  • FLEX AND RESPONSE: Articulating Cuff, Flex Notches, NEW GripLITE Backstay, and NEW Medium Flex PowerUP Tongue
  • COMFORT: Total Comfort Construction, Snow-Proof Internal Gusset, and Level 2 Moulded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating
IMPACT SHOP BURTON  official dealer

BURTON FIEND UNDFTD Ltd 2016

 

 Burton Fiend LTD

 

Raise the bar, then launch right over it with pro-approved response, cranked-up warmth, and Lock N’ Load lacing.
There’s no time for second-guessing in technical terrain, which is why serious riders step to the new Fiend LTD. Innovating the lace-up category, this limited edition steps up its stock counterpart with the focused heel hold and the customizable fit of new Speed Zone™ Lock N’ Load Lacing. The added warmth of Sleeping Bag heat-reflecting foil and impact absorbing ReBounce cushioning with AutoCANT EST® settles the score on a new benchmark in genre-busting freestyle performance.

Traditional Lacing:No fancy wires, reels, or handles, just a couple of laces for that tried and true feel and customized fit.
Shrinkage™ Footprint Reduction Technology:Reduces the boot’s overall footprint one full size, meaning a men’s size 10 fits like a size 10, but has the footprint of a typical size 9. Shorter, lighter, sleeker—never suffer from toe drag again.
Articulating Cuff:Allowing the upper and lower zones of the boot to flex independently creates fluid forward motion, minimizes shell distortion, and maximizes heel hold and response.
Flex Notches:These strategically placed flex notches allow for smoother, more fluid lateral and medial flex, perfect for pressing and tweaking.
New Medium Flex Powerup Tongue:For greater rebound and durability, Burton has upgraded the majority of their 2014 boots to this new dual density tongue construction. Like all their Thin Profile 3D® Moulded Tongues, it’s available in one of three flex options based on the boot. For even greater response, check the thermoplastic-reinforced Power Up Plus Tongue on the Driver X.
Low Profile EST® Optimized Midsole:EST® goes beyond bindings by optimizing the soles on selected boots for a more direct connection. Lower-profile, lighter weight, and with a reduced ramp angle, EST lowers your centre of gravity and improves feel. All without sacrificing an ounce of cushioning thanks to ultra-dampening B3 Gel inserts.
Autocant Cushioning:Dual-density EVA allows your foot to settle into a more natural and relaxed position, resulting in improved comfort, reduced fatigue, and smoother, more direct board control.
Rebounce Cushioning:More comfort and more warmth is the Burton-exclusive upgrade of new Rebounce Cushioning. The extra hops are accomplished by surrounding the foot with a two-layer 3D laminate of cushy PU plus reflective material, which not only reduces impact and absorbs chatter but also turns heat inward.
Sleeping Bag Reflective Foil:This new low-profile and lightweight underfoot technology reflects heat back to the feet, improving both warmth and comfort when faced with cold conditions.
Total Comfort Construction:Get an instantly broken-in feel right out of the box. Total Comfort’s industry-exclusive construction eliminates the break-in period for a fit that feels just as good from day 1 to 100.
Snow-Proof Internal Gusset:All Burton boot tongues feature an internal gusset construction to completely seal the lower zone of the boot, keeping feet warm and dry.
Level 2 Moulded EVA Footbed:Lightweight and long-lasting shock absorption.
ESS Support Shank:The added support reduces fatigue while preventing your arch from collapsing on itself when you bomb drop a 40-footer.
Focus Cuff:Boosting heel-hold by hugging that sweet spot around your ankle, the Focus Cuff rides slightly higher on your ankle for increased response.
Rad Pad:Located on the top of your instep, right where the liner laces exert the most pressure, these pre-curved panels keep your feet stoked and secure.
AEGIS™ Antimicrobial Coating:Inhibits foul odours. Your feet [and your friends] will thank Burton. Look for Aegis™ on select liners and footbeds.

Imprint™ 3 Liner:
1. Focus Cuff Heel Hold System with Velcro® J-Bar Interface and Inner Lace Lock
2. Tuff Cuff with Velcro® J-Bar Interface and Inner Lace Lock
3. Plush Cuff 1.0 [Women’s Only]
4. Lightweight Power Panels [Extra Tall for Added Response on Imprint Liner 3X]
5. Sock Lock
6. Rad Pad for Lace Comfort
7. Velcro® Liner Closure
8. Level 2 Moulded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating
9. Heat-Moldable.



Features

  • Shrinkage™ Footprint Reduction Technology
  • LACING: Traditional with NEW Speed Zone™ Lock N’ Load
  • LINER: Imprint™ 3 Liner with Focus Cuff and Rad Pad
  • CUSHIONING: Low-Profile EST® Optimized Midsole with AutoCANT Cushioning and ReBounce Cushioning with Sleeping Bag Reflective Foil
  • FLEX AND RESPONSE: Articulating Cuff, Flex Notches, NEW GripLITE Backstay, and NEW Medium Flex PowerUP Tongue
  • COMFORT: Total Comfort Construction, Snow-Proof Internal Gusset, and Level 2 Moulded EVA Footbed with ESS Support Shank and Aegis™ Antimicrobial Coating
IMPACT SHOP BURTON  official dealer