• 15 DAYS RIGHT OF RETURN
  • CUSTOMER SERVICE (+39) 080 534 38 01
  • DELIVERY IN 48 HOURS
Close
Menu

SOLAREZ Sponge Rez 55G Bodyboard Repair

Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores. Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.

General Directions:

  1. Surface should be clean, dry, and free of dirt, and or wax.
  2. Use in well ventilated area, preferably outdoors. DO NOT deliberatley inhale vapors – don’t be stupid.
  3. Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damged part of the board. Do not apply Sponge-Rez with your fingers.
  4. Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.

IMPACT SHOP SOLAREZ Dealer

SOLAREZ Sponge Rez 55G Bodyboard Repair
31,00 €
27,00 €
excluding shipping
- +

SOLAREZ Sponge Rez 55G Bodyboard Repair

Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores. Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.

General Directions:

  1. Surface should be clean, dry, and free of dirt, and or wax.
  2. Use in well ventilated area, preferably outdoors. DO NOT deliberatley inhale vapors – don’t be stupid.
  3. Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damged part of the board. Do not apply Sponge-Rez with your fingers.
  4. Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.

IMPACT SHOP SOLAREZ Dealer

Write your own review
  • Only registered users can write reviews
*
*
Bad
Excellent
*
*
*